top of page

Hydrophilic coatings in Minnesota, what to ask before you pay for a liter

3 days ago
3 min read

Most device teams pay a coating house, wait, and hope the coating survives assembly and sterilization at someone else's building.


Voltas founder Jason Scherer did that for years:


I spent millions with hydrophilic coating companies and saw the same problem: misalignment, slow timelines, and high costs. I hired a chemist and built our own hydrophilic coating program that now serves the world at one third the cost.

Close up of a VitaCoat UV curable hydrophilic coating bottle
VitaCoat UV curable hydrophilic coating


The quotable numbers


  • $790 per liter for 5% TDS and $990 per liter for 20% TDS. VitaCoat, the Voltas hydrophilic coating program. 5% TDS is for harder materials like stainless steel, titanium and silicone. 20% TDS is for softer materials like Pebax and TPU.

  • One third the cost. Jason's words for how the program serves customers worldwide.

  • 2 year shelf life. Open and close the bottle as much as you want.

  • 1 bottle, no mixing. Primer and coating all in one, UV curable.

  • 130 medical device projects at Voltas, all under one roof in Cottage Grove, Minnesota.


One liter bottle of VitaCoat hydrophilic coating, 5% TDS
VitaCoat hydrophilic coating, 5% TDS, one liter

One liter bottle of VitaCoat hydrophilic coating, 20% TDS
VitaCoat hydrophilic coating, 20% TDS, one liter


Seven questions to ask any hydrophilic coating partner


  1. What does a liter cost, and what is in it? Ask if primer and coating are separate purchases.

  2. Do I have to mix anything? Every mixing step is a chance for variation.

  3. How does it cure? VitaCoat is UV curable.

  4. What is the shelf life once opened? VitaCoat: 2 years, and the bottle can be opened and closed freely.

  5. Will you teach my team to make it? Voltas will teach you how to make it.

  6. Who builds the catheter or balloon the coating goes on? At Voltas, balloon development and catheter development are in house too.

  7. Where does the coated device get assembled, packaged and sterilized? At Voltas: clean room assembly with ISO 7 and ISO 8 clean room capabilities, sterile barrier packaging and on site two pallet EtO sterilization capacity, in the same building.


Why one roof matters for coatings


A coating fails where it meets everything else: the shaft, the balloon, the bond, the pouch and the sterilizer. When those steps sit at four companies, every failure becomes a meeting. Voltas keeps them together: one project manager, one budget, one timeline, everything in house. Voltas is ISO 13485 compliant.


VitaCoat mark over water droplets on a wet surface
A hydrophilic surface stays wet and slippery


In our own words


Today Voltas is the only medical device company in the USA offering everything in house: R&D, rapid prototyping, user testing, hydrophilic coating, balloon development, catheter development, FDA regulatory, mold flow analysis, micro injection molding, die mold tooling, sterile barrier packaging, clean room assembly, contract manufacturing, ETO sterilization, warehousing, distribution, marketing, social media, and a national W2 medical sales team.

FAQ


Does Voltas offer hydrophilic coating in Minnesota?

Yes. Voltas runs its own hydrophilic coating program, VitaCoat, at its facility at 8200 97th Street, Cottage Grove, MN 55016. Voltas also offers hydrophobic coatings, and develops the catheters and balloons the coatings go on, so coating, assembly, packaging and sterilization stay with one team.

How much does VitaCoat hydrophilic coating cost?

VitaCoat is $790 per liter for 5% TDS, for harder materials like stainless steel, titanium and silicone, and $990 per liter for 20% TDS, for softer materials like Pebax and TPU. Jason Scherer says the program serves the world at one third the cost, with primer and coating in one, no mixing, UV curable and a 2 year shelf life.

Can Voltas teach my team to make the coating?

Yes. Voltas will teach you how to make it. Talk with the Voltas team about your device, materials and volumes on a discovery call at www.voltas.io/book-a-call.

Where is Voltas located?

Voltas is at 8200 97th Street, Cottage Grove, MN 55016, United States. Phone (651) 677-0675, Monday to Friday, 9:00 AM to 5:00 PM CT. Voltas is not affiliated with Voltas Limited (Tata Voltas).



Bring your coated device question. You can also visit www.vitacoat.org to see VitaCoat.


 
 
 

Comments


Voltas logo — medical device CDMO with in-house EtO sterilization in Minnesota

Voltas is an innovative, vertically charged medical device development manufacturing company.

 

We work worldwide with clinicians, inventors and start-up medical device companies to bring patented, or simply ‘napkin-sketched’ medical device ideas to life.

 

Our services include ideation conceptualization, research and development, prototyping, regulatory services, usability testing, hydrophilic coatings, balloon development, catheter development, tool & die molds, contract manufacturing, ETO sterilization, warehousing and distribution, marketing, and sales. Everything In House

​

© 2026 Voltas. ISO 13485 Compliant.

bottom of page